1600 Series Electric Single-Point Injection

(Class A Foam Only)

Leading off the FoamPro line, the 1600 series proportioning systems are specifically designed for Class A foam operations. Capable of drafting up to 3 feet (0.9m), the compact system features fully automatic foam proportioning, regardless of changes in flow or pressure, and delivers unmatched accuracy over the entire flow range. Proportioning is continuous with no need to stop for foam tank refill. The panel-mounted control module provides simple operation at the flip of a switch and offers easy selection of foam percentage. Foam concentrate is delivered by a twin plunger pump coupled to a 1/3 HP motor (12 or 24 VDC). Also included is a flow sensor (choice of 1-1/2" with 1" bore, 1-1/2" or 2"), strainer, foam injection check valve, complete shielded cable set, and RFI/EMI suppression kit. The 1600 Model is engineered for greater capacity while the 1601 Model is specifically designed for extended ultra-low flow applications.

System Features and Benefits

  • 3' Lift Capability
  • Fully automatic-on demand
  • Discharge side injection
  • No in-line restrictions, greater flow
  • Unmatched accuracy over the widest range of flow
  • Smoothest proportioning available at ultra-low flow
  • Leading the industry in proven reliability
  • For use with all Class A concentrates
  • Delivers 0.1 to 1.7 gpm (.38 to 6.4 LPM) of concentrate
  • Injection pressure to 400 psi (28 BAR)
  • Installs easily in new or existing apparatus

Control Module Features

  • Injection percentage from 0.1% to 1.0%
  • On/Off control
  • Foam percentage selector
  • Low concentrate warning indicator
  • No concentrate warning indicator
  • Simulated flow - auto disengage

Options

  • Remote Start/Stop for in-cab control
  • Check valves
  • Flow sensor/check valve manifold
  • Solid state contactor
  • Low-Level tank sensor

  • Remote simulated flow

Ideal for Use On

  • Brush rigs/skid units
  • Fast attack/wildland vehicles
  • Municipal apparatus
  • Compressed Air Foam Systems

Performance

1600 Series

1600 Series w/ Single Tank Flush

Specifications

Specification Details
Foam Pump Twin Plunger Pump
Foam Output 1.0 gpm @ 200 psi - (3.8 LPM @ 14 BAR) 1601
1.7 gpm @ 200 psi - (6.4 LPM @ 14 BAR) 1600
Lift Capability 3 ft 1600/1601
Pump Motor 1/3 hp (.25 Kw) 12 and 24 volt DC
Maximum Operating Pressure 400 psi (28 BAR)
Maximum Operating Temperature 160°F (71°C)
Maximum Amp Draw 19 amps (1601) @ 12 volt DC
30 amps (1600) @ 12 volt DC
11 amps (1601) @ 24 volt DC
15 amps (1600) @ 24 volt DC

System Capacity

Foam Concentration 1601 Maximum Water Flow gpm (LPM) 1600 Maximum Water Flow gpm (LPM)
0.2% 500 (1893) 850 (3218)
0.5% 200 (757) 340 (1287)
1.0% 100 (379) 170 (644)

Attack Capability

Class A Foam Concentration 1601 Maximum Coverage per Critical Application Rate (Iowa Formula) - cu. ft (cu. m) 1600 Maximum Coverage per Critical Application Rate (Iowa Formula) cu. ft (cu. m)
0.2% 50000 (1415) 85000 (2406)
0.5% 20000 (566) 34000 (962)
1.0% 10000 (283) 17000 (481)

Accessories

View all the standards, options and available accessories for FoamPro products.

Documents & Downloads