2000 Series Electric Single-Point Injection

(Class A & B Foam)

Designed for Class A and/or Class B foam applications, the 2000 series of proportioners delivers greater flow capabilities than the 1600 series. In addition, the panel-mounted digital control module offers easy to use, push button control. Real time flow and proportioning performance information is displayed by ultra-bright LED readouts. The system features fully automatic foam proportioning, regardless of changes in flow or pressure, and delivers unmatched accuracy over the entire flow range. Proportioning is continuous with no need to stop for foam tank refill. Two models are available, differing in concentrate capacity: the 2001 at 2.6 gpm (9.8 LPM), the 2002 at 5.0 gpm (19 LPM). Foam concentrate is delivered by a triplex plunger pump and motor (12 or 24 VDC) assembly. The optional advanced feature controller offers “auto-on” programming.

System Features and Benefits

  • Fully automatic-on demand
  • Discharge side injection
  • No in-line restrictions, greater flow
  • Unmatched accuracy over the widest range of flow
  • Smoothest proportioning available at ultra-low flow
  • Leading the industry in proven reliability
  • Proportions continuously, with no stopping to refill
  • Delivers 0.01 to 5.0 gpm (0.038 - 19 LPM)

  • Injection pressure to 400 psi (28 BAR)
  • Achieves full pump capacity with all known Class A, Class B, AFFF, and most Class B AR-AFFF

  • Installs easily in new or existing apparatus

Control Module Features

  • Ultra-bright LED digital readout
  • Injection percentage from 0.1% to 10.0%
  • Display following information:

    • Low concentrate/ No concentrate warning
    • Water flow rate
    • Total water used
    • Injection percentage
    • Total concentrate used
  • Dual-tank capability and calibration
  • Displays separate totals for each tank
  • Calibrate for each concentrate

Options

  • Concentrate Management Systems
  • Advanced Feature Controller - Auto On
  • MultiFlo
  • Remote Start/Stop for pump and roll applications
  • Dual-Injection Selector
  • Solid State Contactor
  • Flow sensors, check valves, manifolds
  • Low-Level Sensors

Ideal for Use On

  • Municipal pumpers
  • Fast attack/wildland vehicles
  • Marine and shipboard system
  • Compressed Air Foam Systems

Performance for 2000 Series

2000 Series w/ Manual Concentrate Mgmt System

2000 Series w/ Electronic Concentrate Mgmt System

Specifications

Specification Details
Foam Pump   Triplex  Plunger Pump
Foam Output 2.6 gpm @ 150 psi - (9.8 LPM @ 10 BAR) 2001
5.0 gpm @ 125 psi - (19 LPM @ 10 BAR) 2002
Pump Motor 1/2 hp (.40 Kw) 12 and 24 volt DC - 2001
3/4 hp (.56 Kw) 12 and 24 volt DC - 2002
Maximum Operating Pressure 400 psi (28 BAR) STD
Maximum Amp Draw 41 amps @ 12 volt DC - 2001
60 amps @ 12 volt DC - 2002
22 amps @ 24 volt DC - 2001
30 amps @ 24 volt DC - 2002

System Capacity

Foam Concentration 2001 Maximum Water Flow gpm (LPM) 2002 Maximum Water Flow gpm (LPM)
0.2% 1300 (4921) 2500 (9464)
0.5% 520 (1968) 1000 (3785)
1.0% 260 (984) 500 (1893)
3.0% 85 (322) 166 (628)

Attack Capability

Class A Foam Concentration cu.ft. (cu.m) 2001 Maximum Coverage per Critical Application Rate cu.ft. (cu.m) 2002 Maximum Coverage per Critical Application Rate  cu.ft. (cu.m)
0.2% 130000 (3681) 250000 (7079)
0.5% 52000 (1472) 100000 (2831)
1.0% 26000 (736) 50000 (1415)
Class B Foam Concentration Hydrocarbon @ 0.10 gpm/sq.ft. (0.37854 LPM/sq.m) sq. ft (sq. m)
1.0% 2600 (241) 5000 (464)
3.0% 850 sq. (78) 1660 (154)
Polar Solvent @ 0.20 gpm/sq.ft. (0.757 LPM/sq.m)
3.0% 425 (39) 830 (77)

Accessories

View all the standards, options and available accessories for FoamPro products.

Documents & Downloads