3012 Series Hydraulic Single-Point Injection

(Class A & B Foam)

Greater Class A and Class B firefighting power is at your fingertips with the FoamPro Model 3012 proportioner. This versatile system delivers unmatched, supercharged performance with concentrate flow from 0.1 to 12.0 gpm (.38 to 45.0 LPM) at 0-400 psi (0-28 BAR), all from a single pump. High drafting capabilities allow off-board pickup for foam operations or tank refill, which is crucial for higher flow demands or when changing concentrates. Unlike other pump designs that may pause in flow during operation, FoamPro’s triplex plungers are timed to discharge one after the other delivering smooth, continuous injection. The hydraulic pump drive and microprocessor control technology delivers extremely accurate concentrate injection from minimum flow to full capacity. The system includes the same industry-proven, ultra-bright LED digital display/control module used on FoamPro 2000 series proportioning systems.

System Features and Benefits

  • Fully automatic-on demand
  • Discharge side injection
  • No in-line restrictions, greater flow
  • Unmatched accuracy over the widest range of flow
  • Smoothest proportioning available at ultra-low flow
  • Leading the industry in proven reliability
  • Proportions continuously, with no stopping to refill
  • Industry’s highest capacity Class A/B system
  • Variable displacement hydraulic pump
  • Delivers 0.1 to 12.0 gpm (0.38 - 45.0 LPM)
  • Injection pressure to 400 psi (28 BAR)
  • Achieves full pump capacity with all known Class A, Class B AFFF and most Class B AR-AFFF

  • Installs easily in new or existing apparatus

Control Module Features

  • Ultra-bright LED digital readout
  • Injection percentage from 0.1% to 10.0%
  • Display following information:

    • Low concentrate/ No concentrate warning
    • Water flow rate
    • Total water used
    • Injection percentage
    • Total concentrate used
  • Dual-tank capability
  • Displays separate totals for each tank
  • Calibrate for each concentrate

Options

  • Concentrate management systems
  • Advanced feature controller - auto on
  • MultiFlo
  • Remote start/stop for pump and roll
  • applications
  • Dual-Injection selector
  • Solid state contactor
  • Flow sensors, check valves, manifolds
  • Low-Level sensors
  • Manual Override
  • Single tank and off-board pickup

Ideal for Use On

  • Municipal pumpers
  • Aerials
  • Marine and shipboard systems
  • Compressed Air Foam Systems

System Diagram

Specifications

Specification Details
Foam Pump Triplex Plunger
Foam Output gpm (LPM) @ 200 psi 0.1-12.0 (0.38-45.0)
Maximum Operating Pressure psi (BAR) 400 (28)
Maximum Operating Temperature °F (°C) 160 (71)
Pump Motor Hydraulic
Hydraulic Supply Oil Pressure psi (BAR) 1250 (86.2)
Hydraulic Supply Oil Flow gpm (LPM) 12 (45.0)
Maximum Amp Draw 5

System Capacity

Foam Concentration Maximum Water Flow gpm (LPM)
0.20% 6000 (22771)
0.30% 4000 (15140)
0.50% 2400 (9084)
1.00% 1200 (4542)
3.00% 400 (1514)
6.00% 200 (757)

Attack Capability

Class A Foam Concentration 3012 Maximum Coverage per Critical Application Rate (Iowa Formula) cu. ft (cu. m)
0.2% 600000 (16990)
0.5% 240000 (6796)
1.0% 120000 (3398)
Class B Foam Concentration Hydrocarbon @ 0.10 gpm/sq.ft (0.37854 LPM/sq.m) sq. ft (sq. m)
1.0% 12000 (1114)
3.0% 4000 (371)
6.0% 2000 (185)
Polar Solvent @ 0.20 gpm /sq.ft. (0.757 LPM/sq.m)
3.0% 2000 (185)
6.0% 1000 (92)

Accessories

View all the standards, options and available accessories for FoamPro products.

Documents & Downloads